Configure NIC Teaming in VMware

First go to Windows Server 2012 
then go to Server Manger
Click on All Server
then right click on your Server  and click on NIC Teaming
then click new Task
and configure NEW TEAM 

 

















This allows you to name the team.  I called mine “Hyper-V Team”


 The defaults are “Switch Independent” (no advanced configuration necessary on the switch), “Address Hash” (will enable load balancing and bandwidth aggregation), and Standby Adapter (if configured, will enable on one NIC and the other will be used for failover only).  Even though I am using these with Hyper-V, I will use the defaults.  If this were a production deployment with a high density server, I’d give much deeper consideration to these settings based on my requirements.
Click OK, and our team config is complete!

We will Configure LACP
all thing is same just Select  Teaming Mode : LACP
 and Load Balancinf mode : Address Hash OR Dynamic
click apply  and  ok


NOW go on Switch and Select interfaces which are connected to server

int range fa0/0-4
channel group 1 mode active
end
show Etherchannel Summary

Eve and Gns Error TRC=0 TDR=0

%AMDP2_FE-6-EXCESSCOLL: Ethernet0/1 TDR=0, TRC=0

 

Try these commands once

logging discriminator EXCESS severity drops 6 msg-body drops EXCESSCOLL
logging buffered 50000
logging console discriminator EXCESS

or try different image